Technical Data; Dimensions And Weight; Ambient Conditions At The Installation Site; Sartorius Service - Sartorius Slice 50 Instrucciones De Instalación

Technical Data

9 Technical Data
9.1

Dimensions and Weight

Dimensions (width × depth × height), single adapter
Dimensions (width × depth × height), stand with adapters
Weight, total
9.2

Ambient Conditions at the Installation Site

Conventional laboratory rooms, max. 2000 m above sea level
Temperature
Temperature during operation
Temperature fluctuations when carrying out filtration processes, maximum
Temperature fluctuations when carrying out filtration processes, maximum
Relative humidity
Relative humidity during operation, maximum
Relative humidity fluctuations when carrying out filtration processes, maximum
Relative humidity fluctuations when carrying out filtration processes, maximum
Protection class according to EN 60529

10 Sartorius Service

Sartorius Service is available for queries regarding the device. For information about the service addresses, services
provided or to contact a local representative, please visit the Sartorius website (www.sartorius.com).
When contacting Sartorius Service with questions about the system or in the event of malfunctions, be sure to have
the device information – e.g. serial number, hardware, firmware, configuration – close at hand. This information can be
found on the manufacturer's ID label.
18 Installation Instructions Sartocon Slice 50 Adapter
®
Unit Value
mm 122.5 × 168.2 ×
18.15
mm 330.0 × 173.4 ×
250.1
kg 4
Unit Value
°C +6 – +40
°C ± 5
°C / hour ± 5
% 60
% ± 10
% / hour ± 10
IP2X