DeWalt DCF503 Traducido De Las Instrucciones Originales página 24

EngLIsh
12 V RATCHETS
DCF503, DCF503E, DCF504
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
No load speed
Length
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑2:
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Vibration emission value a = m/s
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
22
WALT one of the
e
DCF503 DCF503E
V 12 12
DC
1 1
0–250 0–250
mm 330 430
kg 1.0 1.2
dB(A) 83 83
dB(A) 94 94
dB(A) 3 3
5.5 3.5
2
m/s 2 1.5 1.5
EC‑Declaration of Conformity
o
Machinery Directive
Ratchets
DCF504
DCF503, DCF503E, DCF504
12
D WALT declares that these products described under Technical
e
1
Data are in compliance with:
0–250
2006/42/EC, EN62841‑1:2015, EN62841‑2‑2:2014.
305
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
0.75
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
74
85
3
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
< 2.5
65510, Idstein, Germany
1.5
30.10.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
D WALT declares that these products described under Technical
e
Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841‑1:2015, EN62841‑2‑2:2014
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
REGULATIONS 2008
Ratchet
DCF503, DCF503E, DCF504
WALT at
e
WALT.
e