Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 Intended use
The product is designed to extract welding fumes generated during E-
welding from their point of origin. In general, the product can be used for
all work processes in which welding fumes are released. However, it is
important to ensure that no "sparks" are drawn into the product from, e.g.
a grinding process.
The product must not be used in an explosive atmosphere and not for the
extraction of an explosive atmosphere.
The product is not suitable for the extraction of acid or caustic vapors.
The technical data includes the dimensions and further details for the
product which have to be observed.
NOTE
The information in the chapter Technical data must be observed and
strictly adhered to.
Intended use also includes the observation of the instructions and
information on
•
safety
•
operation and control
•
maintenance and servicing
contained in this manual.
Any other use or use going beyond this is considered improper use. The
company operating the product is solely responsible for any damage
resulting from it. This also applies to unauthorised modifications to the
product.
3.3 Reasonably foreseeable misuse
No reasonable, foreseeable misuse is possible that could lead to dangerous
situations with personal injury when working with the product whilst
adhering to its intended use.
The operation of the product in industrial areas that do not comply with
the requirements for explosion protection is not permissible.
Furthermore, the operation is prohibited for:
1. Processes that are not in the intended use list and in which the
extracted air is:
1502761-03
- 61 -
EN
Publicidad
