Kemper 79 409 Instrucciones De Servicio página 88

EN
6 Use
Every person who deals with use, maintenance and repair of the product
must have thoroughly read these operating instructions as well as the
instructions for any attachment and accessory products and have
understood them.
6.1 Qualification of the operating personnel
The operating company of the product may only commission persons to
use the product independently if they are well-versed in this task.
Those familiar with this task includes those who have been instructed
appropriately in the task and know the operating instructions as well as the
operational issues in question.
The product should only be used by trained or instructed personnel.
This is the only way to ensure safety and hazard awareness of all personnel
during work.
6.2 Positioning the extraction hood
The extraction arm or extraction hood is designed in such a way that it can
be adjusted and moved easily by hand. Once it has been positioned, the
extraction hood maintains its set position of its own accord. Furthermore,
both the extraction hood and the arm can be pivoted through 360° so that
almost any position can be set. It is important that the extraction hood is
always positioned properly in order to achieve adequate capture of the
welding fumes. The correct position is shown on the following image.
Fig. 43: Positioning the extraction hood
1502761-03 - 88 -