Kemper 79 409 Instrucciones De Servicio página 75

3. Position the spacers on the lower leg of the cantilever arm.
4. Then push the plain bearing bush of cantilever arm 2 (item 22) into the
holder of cantilever arm 1 (item 18).
5. Insert the axis bolt (item 19) through the holes of the bracket on
cantilever arm 1 (item 18), through the plain bearing bush of cantilever
arm 2 (item 22) and through the spacer (item 20).
6. Slide a washer over the end of the axis bolt (item 19) and secure the axis
bolt with the screw (item 21).
5.6 Installing the extraction arm on the cantilever arm
1502761-03
Fig. 33: Connecting the cantilever arms together
- 75 -
EN