Kemper 79 409 Instrucciones De Servicio página 73

2. Position the cantilever arm in the lower bracket of the wall mount
bracket (item 8) and fasten with the screw so that the cantilever arm
remains movable.
3. Mount the pipe brackets (item 10) on the tie rod (item 11).
4. Position the tie rod (item 11) in the upper holder of the wall mount
bracket and secure it with the screw so that it remains movable.
5. Raise both parts of the cantilever arm so that the cantilever arm is
horizontal.
6. Now connect the tie rod and the cantilever arm with the clamping
screw.
7. Align the cantilever arm exactly horizontal by tightening/loosening the
clamping screw.
8. After alignment, tighten the screws firmly.
5.5.1 Installing the cantilever arm – part 2
1502761-03
Fig. 31: Cantilever arm part 2
- 73 -
EN