Publicidad
Idiomas disponibles
Idiomas disponibles
10. Cleaning
10.1 Notes
•
Clean the pump-filter unit (11) every time the filter paper is changed.
•
Clean VITO only when it is cooled down.
•
DO NOT use abrasive cleaners.
•
DO NOT use a wire brush or similar.
10.2 Preparing for cleaning
1. Make sure that VITO has cooled down.
2. Loosen the star handles (7) (on both sides).
3. Detach the control unit (8) from the pump-filter unit (11).
4. Open the pump-filter unit (11).
5. Remove and dispose of the filter paper (see chapter 12.2 Filter disposal).
6. Manual cleaning or cleaning with the dishwasher
10.3 Manual Cleaning
1. Clean the control unit (8) with a damp cloth!
DO NOT use running water! This will damage the control unit!
2. Wash the pump-filter unit (11) and the drip tray (6).
3. Dry VITO.
10.4 Cleaning with the dishwasher
1. Clean the control unit (8) only with a damp cloth!
NEVER put the control unit (8) in the dishwasher! This will damage the unit.
2. Put the pump-filter unit (11) and the drip tray (6) into the dishwasher. Hint: Do not open the filter cover completely. This
allows the water to circulate better.
3. Start the cleaning program.
Do not open the filter cover completely.
10.5 Boil out
If the pump-filter unit (11) is heavily soiled, deep clean it with water and soap or deep fryer cleaner.
Regular boil outs are recommended for optimal cleaning and maintenance results.
Only put the pump-filter unit (11) and the drip tray (6) in the dishwasher.
Page 7
Publicidad
