Bemer Therapy System Evo Instrucciones De Uso página 33

8.2.2 Settings (start screen)
Before starting an application, the basic settings should be configured.
z Press 12 <Settings>.
The settings menu opens.
A1 A2
Settings
1
Volume and voiceover
2
Display and brightness
3
Time
4
Expert mode editor
5
System
BACK
Settings menu
8.2.3 Adjust the signal volume
<Volume and voiceover>.
z Press 1
Settings – Volume and voiceover opens.
A1 A2
Settings – Volume and voiceover
1
2
BACK
VOICEOVER SAVE
Settings: Volume control and voiceover
z Adjust the volume for signals, voiceover and music via
1 <Volume control>.
To increase the accessibility of the BEMER therapy system for visually impaired users,
<Voiceover> function.
z Enable the 2
z Press <Save> to save your changes and return to the settings menu.
z Press <Back> to exit the menu without saving your changes.
21:13
21:13
64
2 Voiceover is an operating aid (for visually impaired users). If voiceover is enabled,
a pre-recorded voice describing the controls is heard.
If the relaxation music is disabled during an ongoing treatment, the voiceover function
remains active if it was previously enabled.
8.2.4 Adjust the display brightness
z Press 2 <Display and brightness>.
Settings – Display and brightness opens.
A1 A2
Settings – Display and brightness
1
AUTO- 2
BACK
SAVE
BRIGHTNESS
Settings – Display and brightness
z Adjust the brightness of the display using the
z Enable or disable 2 <Auto Brightness>.
z Press <Save> to save your changes and return to the settings menu.
z Press <Back> to exit the menu without saving your changes.
If necessary, enable or disable 2 <Auto Brightness>. In automatic mode, the display
brightness is adjusted in accordance with the ambient light levels. If the control is grayed
out, auto brightness mode is enabled.
ES NL IT FR
21:13
1 <Brightness control>.
65
DE EN