Bemer Therapy System Evo Instrucciones De Uso página 34

8.2.5 Set the current time
z Press 3 <Time>.
Settings – Time opens.
A1 A2
Settings – Time
12:44
BACK
SAVE
Settings – Time
z Press < > to adjust the hours.
z Increase or decrease the displayed hours via <+> and <−>.
z Press < > to adjust the minutes.
z Increase or decrease the displayed minutes via <+> and <−>.
z Press <Save> to save your changes and return to the settings menu.
z Press <Back> to exit the menu without saving your changes.
8.2.6 Expert mode editor
Via the expert mode editor, three custom programs (E1 to E3) can be created by the user.
The intensity and time parameters are set.
z Press 4 <Expert mode editor>.
Settings – Expert mode editor opens.
A1 A2
Settings – Expert mode editor
E1 E2 E3
20 Minutes
BACK
The program editor is used to configure user-
defined program sequences and enable/disable
the plus Signal.
21:13
21:13
66
z Select the expert program to edit: <E1>, <E2> or <E3>.
z Press the corresponding button.
Expert mode – <Program name> opens.
A1 A2
2
Expert mode – E1 –
HIGH
MEDIUM
LOW
2 4 6 8 10 12 14 16 18 20
1
BACK
SAVE
PLUS
Expert mode editor – detailed settings
z Press < > or < >, to select the treatment time.
z Increase or decrease the treatment intensity via <+> and <−>.
z Enable or disable the 1 <Plus> signal.
z When the <Plus> signal is enabled, the <Plus> symbol appears in the
z Press <Save> to save your changes and return to the settings menu.
z Press <Back> to exit the menu without saving your changes.
The individually predefined expert programs can be selected
via the PROGRAMS menu.
8.2.7 System
Basic system settings are configured here (ambient lighting, energy saving mode, system language,
time format). In addition, general system information can be found here.
z Press 5 <System>.
Settings – System opens.
ES NL IT FR
21:13
2 status bar.
67
DE EN