Publicidad
Idiomas disponibles
Idiomas disponibles
11 ERROR CODES
If your machine is fitted with a touch screen, the image for the error will be displayed on the screen.
If your machine is fitted with a capacitive interface screen, the image for the error will be displayed
on the screen. Pressing Start/Stop button cancels the error.
Error numbers and their associated image are detailed in the table below.
Flashes or code displayed on
screen
Problem description
Cover or door open
Electric circuit fault
Variable speed drive fault
Claw fault
Object in front of the cutting
channel sensor
Linear fault
Carriage return timeout
17
Action
Please close the crumb tray door and/or the
top cover.
Please switch the machine off using the main
switch (fig.2, n°12) and on again after 30
seconds. Should the problem persist, please
contact your technician.
Please switch the machine off using the main
switch (fig.2, n°12) and on again after 30
seconds. Should the problem persist, please
contact your technician.
Please ensure that there is no object or dust
interfering with the loaf-holding claw.
Please remove any object in the vicinity of
the blade aperture channel and position the
loaf at the bottom on the right-hand side of
the infeed table.
Check that the carriage track is clear.
English
Publicidad
