Canon 1238iF II Guía De Preparación página 2

En
Configuring the Initial Settings
Fr
De
Unless otherwise stated, illustrations used in this
It
document are for the 1238iF II.
Es
Specifying the Basic
1
Ca
Settings
Eu
When you turn on the machine for the first time, the Setup
Pt
Guide appears on the operation panel. Perform the initial
machine setup by following the on-screen instructions.
El
Da
Operation panel
Nl
No
Sv
Fi
Ru
Uk
1.
Select the language, then the country/
Lv
region and finally the time zone.
Lt
2.
Set the current date/time.
Et
Pl
Specifying the Security
2
Cs
Settings
Sk
Specify the basic security settings to prevent unauthorized
access to the machine.
Sl
1.
To use the Remote UI, select <Yes>.
Hr
To continue without using the Remote UI, select
Hu
<No> and proceed to step
Ro
2.
To use System Manager mode, select <Yes>.
• Set the System Manager ID and PIN so that you
Bg
can configure the settings for extended functions
and the management of access privileges, etc.
Tr
• To continue without using System Manager
Ar
mode, select <No> and proceed to step 5.
3.
Fa
Set the System Manager ID.
Enter any number and then select <Apply>.
.
3
2
4.
Set the System Manager PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
5.
To use General User mode, select <Yes>.
• Set the PIN to be used by general users to access
the Remote UI.
• To continue without using General User mode,
select <No> and proceed to step
6.
Set the Remote UI Access PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
Specifying the Network
3
Settings
Specify the settings for connecting the machine to a
network. Before proceeding, check that the computer and
router are correctly connected to the network.
Wireless LAN
1.
Check the router's "SSID" and "Network
key."
SSID
: XXXXXXXXXXXX
Network key
: XXXXXXXXXXXX
2.
To configure the settings, select <Yes> on
the operation panel.
3.
Check the message and select <OK>.
4.
Select the network with a matching SSID.
5.
Enter the password (network key) and select
<Apply>.
.
3