Descargar Imprimir esta página

Infiniton HCT-200 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Don't expose your container to extreme heat area.
9.
Don't locate any other container with in the space/room in which your heater is used.
10.
11.
Do not insert your finger or any other material through the front panel of the heater.
12.
Leave at least 1 meter distance between your heater and the other heat source.
13.
Do not let unauthorized persons to interfere with your heater.
14.
Do not place appliance under socket outlet.
Don't use the heater in surroundings of a bath, shower of swimming pool,
15.
leisure vehicles such as caravans or auto caravans .
16.
This heater must not be used without a gas container fitted for stability purposes.
17.
Do not cover your heater.
18.
Fabrics, clothing, hangings, net curtains, bed linens and other flammable materials may
ignite if placed against the outlets of your heater.
19. In the event of leakage, the appliance shall be turned off valve and the regulator
disconnected from the container.
20. After use, turn off the appliance at the gas valve.
21. Only use in a well ventilated area.
22. Safety earth connection required when using the electrical parts。
23. When cleaning or maintaining the electrical parts, water spaying or rain is prohibited。
24. Please don't have the children touch the appliance when using heating elements。
25. Switch off the appliance when leaving。
26. If the supply cord is damaged,it must be replaced by the manufacturer,its service agent or similarly
qualified persons.
27. In order to avoid overheating, do not cover the heater.
STORAGE
1.Disconnect container.
2.Store container in a well-ventilated area away from combustible material.
Storage should preferably be in an outhouse but must not be in a basement or high-rise flat.
3. The heater should be covered in a dry, dust-free medium in its original package.
CLEANING
1. Use a damp cloth wrung out in a solution of soapy water to clean the exterior and container
storage area of your heater.
2. Quartz tube and reflector cleaning: Before clean quartz tube and reflector, must disconnect
the plug. first remove barbed wire in front of quartz tube, use dry cloth to wipe clean the
surface of quartz tube and reflector , and then put the wire back into the position.
3. Make sure that no water gets onto the burners or pilot/light area. Wipe the heater
completely dry before use.
4. Don't use abrasive cleaners as they may damage the quality paint finish.
MAINTENANCE
1. Check flexible tube between regulator and heater before every operation and replace it
if perished, worn or damaged. In any case consider its expiration date to replace the tube
2. Contact agent named on last page of this manual if any major maintenance is needed.
3. It is recommended that the heater is maintained every two years by authorized personnel.
6

Publicidad

loading