Publicidad
Idiomas disponibles
Idiomas disponibles
Model Number
Voltage rating
No load speed
Permitted battery temperature
during charging
Permitted ambient temperature
during operation and storage
Recommended ambient
temperature during charging
Maximum Capacities
Recommended Blade
Depth of Cut
Workpiece wall thickness
Please refer to the battery/charger list, included with your tool.
NOTE: For tool specifications refer to the nameplate on your tool.
Use this saw only as intend-
ed. Unintended use may re-
sult in personal injury and property damage.
Do not use Wet Diamond
cutting off wheel or water
feed devices with this circular saw. Masonry
cutting waste will enter the lower guard system,
harden and cause the guard to become inoper-
able. Use of water in masonry cutting applica-
tions with an electric circular saw will cause
electric shock hazards.
Specifications
page heading
Ø5-3/8" (20mm Arbor) Metal cutting blade
Battery Packs / Chargers:
Intended Use
dust may cause lower guard to fail.
This tool is intended for cutting unhardened fer-
rous metal and non-ferrous metal.
This tool is not designed for use with wood or
masonry cut-off wheels.
-12-
GKM18V-20
18 V
0—4,250 rpm
+32...+113°F (0...+45C)
-4...+122°F (-20...+50C)
+32...+95°F (0...+35°C)
2" (51 mm)
1/4" maximum
Do not use abrasive wheels
with circular saws. Abrasive
Publicidad
