Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Model
JIO7013309
JIO9013316
JIO11013323
COMPONENTS DESCRIPTION
1. Handle
2. Adjustable Thermostat
3. On/Off Switch
4. Cable holder
5. Wheels
6. Fins
ASSEMBLY
1.
Turn the heater upside down
2.
Position the wheel base assemblies between the end fins.
3.
Attach them to the heater using the U-bolts and wing nuts supplied.
4.
Tighten the wing nuts.
5.
Turn the heater right way up.
OPERATION
1.
Place the heater on the floor at least 90cm away from the wall and any other objects such as
furniture, curtains or plants.
2.
Make sure the power supply used corresponds to the one on the rating label.
With the thermostat switch and power settings switch in the "0" position; Plug the heater into the
3.
main power supply.
USING THE THERMOSTAT SWITCH AND THE POWER SETTING SWITCHES
1.
Room temperature can be adjusted using the thermostat. Simply turn the thermostat knob
clockwise (+) to increase the heat and anti-clockwise (-) to decrease the temperature until you
reach the desire temperature.
2.
Switch the heater to the one of the following power settings.
Nominal Power
1500W
2000W
2500W
-12-
Supply
220-240V
220-240V
220-240V
Frequency
50Hz
50Hz
50Hz
Publicidad
