Publicidad
Idiomas disponibles
Idiomas disponibles
22 Inspection and Maintenance
22 Inspection and Maintenance
22.1 Inspection and Maintenance Chart
Always remove the connecting cord before carrying out any inspection, cleaning or maintenance.
The following maintenance intervals are examples and apply for normal operating
conditions. Actual use and your experience will determine the frequency of required
inspection and maintenance.
Complete Machine
Controls
Gearbox
Cutting Blades
22.2 Inspecting and Maintaining the Hedge Trimmer
WARNING
To reduce the risk of personal injury from unintended
activation, remove the connecting cord before inspecting the
hedge trimmer or carrying out any maintenance, @ 7. Carry
out only the maintenance operations described in this
manual. There are no user-authorized repairs. STIHL
recommends that repair work be performed by authorized
STIHL servicing dealers.
To properly maintain the hedge trimmer:
► Lubricate the gearbox.
► Sharpen the cutting blades.
► Have worn or damaged cutting blades replaced by an
authorized STIHL servicing dealer.
► Have worn, missing or damaged safety labels replaced by
an authorized STIHL servicing dealer.
0458-021-8601-A
Visual inspection
Clean
Check function and condition
Lubricating
Visual inspection
If you make a warranty claim for a component that has not
been serviced or maintained properly, coverage may be
denied.
22.3 Lubricating the Gearbox
To lubricate the gearbox:
2
► Remove the screw plug (1).
English
X
X
@ 21.1
X
@ 16.1
X
@ 22.3
X
X
1
35
Publicidad
