Publicidad
Idiomas disponibles
Idiomas disponibles
English
3 Switch Lever
Activates the cutting attachment when depressed in
combination with the trigger switch.
4 Retaining Latch
Locks/unlocks the trigger switch.
5 LEDs
Indicate the unit's power level.
6 Trigger Switch Lockout
Must be depressed while the retaining latch is unlocked
to allow activation of the trigger switch.
7 Control Handle
Handle for the operator's rear hand.
8 Socket
Socket for the battery connecting cord.
9 Trigger Switch
Activates the cutting attachment when depressed in
combination with the switch lever.
10 Blocking Lever
Lever for rotating the rear handle.
11 Mounting Recess Cover
Covers the mounting area for a Smart Connector 2 A.
12 Screw Plug
Seals the grease filler opening at the gearbox.
13 Hand Guard
Helps protect the operator's front hand from projecting
branches and other materials and from contact with the
cutting blades.
14 Cutting Blade Guard
Helps protect the operator from contact with the cutting
blades.
15 Cutting Blades
Steel blades for cutting hedges, shrubs and bushes.
1
Remove the mounting recess cover only to install a Smart
Connector 2 A. Store it safely for later reinstallation. Always use the
power tool with the mounting recess cover in place or with the Smart
Connector 2 A mounted.
4
1
16 Tip Guard
Helps protect the tip of the cutting blades from contact
with solid objects.
# Rating Plate
Contains electrical information and the product's serial
number.
3.2
Battery Harness Options
3
1
2
6
5
The HSA 130.0 R, HSA 130.0 T may be powered by a
STIHL AR series backpack battery. Alternatively, it may be
powered by a STIHL AP series battery in combination with a
STIHL AP Battery Bag with Connecting Cord.
A variety of battery harness options are available for use
with the HSA 130.0 R, HSA 130.0 T. (Batteries, battery
harnesses and other accessories sold separately.)
3 Main Parts
5
4
3
2
2
3
0458-021-8601-A
Publicidad
