Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1. INTRODUCTION.
We appreciate the trust placed in our brand and we hope that the welding equipment you have just
acquired will be of great use to you. Your machine has many features that will make your job faster and
easier. Safety, comfort and reliability were a priority for the design of this tool, which makes maintenance
and operation easy.
The TITAN200ACDC equipment is an AC/DC TIG welding machine with high frequency ignition, in direct
and alternating current with pulse function, built with inverter technology. It is also suitable for welding
with electrode (MMA) rutile, basic, stainless steel, cellulosic, aluminum and cast iron. The TITAN200ACDC
equipment, in its TIG function, can be used for welding various types of materials, such as steel, stainless
steel and copper.
The main features of the TITAN200ACDC are:
• Memorization of welding parameters.
• AC/DC TIG.
• Arc force, hot start, non-stick.
• the ease of starting the arc thanks to the high frequency (HF) and the 2T / 4T mode (in TIG welding).
• Pulsation (in TIG welding).
2. DESCRIPTION OF THE PRODUCT.
3. GENERAL SAFETY RULES.
WARNING: These instructions have been developed to facilitate the proper installation, operation
and maintenance of the equipment. Read the entire manual carefully before using the equipment, in order
to understand its features and reduce risks during its operation. Make sure you read and understand all
instructions, and to pay attention to all warnings and precautions throughout this manual. Failure to follow
the instructions contained in this manual may result in electric shock, fire and/or serious personal injury.
KEEP THESE INSTRUCTIONS.
29
1.
Control Panel.
2.
TIG
torch
control
potentiometer connector.
3.
Positive (+) welding terminal.
4.
Negative (-) welding terminal.
5.
Gas connection for TIG torch.
6.
ON/OFF switch.
7.
Power cord.
8.
Connector for gas bottle tube.
button
and
Publicidad
