Descargar Imprimir esta página

Brita MAXTRA PRO Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Highest quality & hygiene
Over 50 years of water filter experience stands for:
9 Innovation
9 the highest quality
In order to meet our high quality standards, there are strict internal
and external quality controls in place.
Every MAXTRA PRO water filter undergoes treatment with hot
steam for hygiene purposes during manufacture and is then
packed in a protective foil. (Note: the water filter may be damp
due to condensation following the steam treatment).
The filter material of the MAXTRA PRO water filter undergoes a
special treatment with silver for hygiene reasons.
A small quantity of silver may be released into the water. This is in line
with the recommendations of the World Health Organization (WHO).
BRITA recommends replacing the water filter regularly.
Please follow the recommended cleaning procedures and advice
on preparing the filter (chapters 1 – 7).
The jug should be cleaned regularly.
Note:
If the jug is not being used for a while, remove the water filter,
empty the jug and replace the water filter loosely in the empty
funnel.
Please refer to chapter 7 "Changing the MAXTRA PRO water filter".
Operation – very easy
  Clean before the first use and every time you change the water
1
filter
For optimum cleaning results, turn the BRITA PerfectFit funnel
upside down and flush the BRITA PerfectFit mechanism with tap
water for a few seconds (excluding BRITA Flow). The jug should be
cleaned before the first use and when you change the water filter
– the funnel and jug are dishwasher safe (max. 50° C) or can be
cleaned by hand! Please clean your BRITA Flow only by hand with
cold or lukewarm water.
Glass Jug: In general, the Glass Jug sealing rings are dishwasher
proof, but we still recommend washing them by hand. Otherwise,
slight discolouration may occur. Dry it thoroughly before
reattaching it to the funnel.
Lid with BRITA Smart Light  A1 + A2
Please remove the BRITA Smart Light before cleaning the lid (turn
counter-clockwise (x)).
The BRlTA Smart Light must not be washed in the dishwasher!
Remove the BRITA Smart Light by hand and clean with a soft,
damp cloth.

Publicidad

loading