Hitachi PC-ARFP1E Manual De Instalación Y Funcionamiento página 29

SETTING METHOD
12 SETTING METHOD
12.1 TEMPERATURE SETTING
1 Press " " or " " and select "TEMP".
OK
2 By pressing " ", the temperature is increased by 1
30 C). By pressing " ", the temperature is decreased by
o
1 C. (Cooling, Dry, Air Flow operation: Min. 19
o
operation: Min. 17 C).
o
OK
12.2 FAN SPEED
1 Press " " or " " and select "SPEED".
OK
2 By pressing " " or " ", the fan speed will be changed as
follows.
OK
21 PMML0404A rev.1.1 - 06/2022
A/C Meeting Room
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ
C. (Max.
o
C) (Heating
o
Meeting Room
A/C
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ
.
A/C Meeting Room
MODE SPEED TEMP
COOL
HIGH
MODE TEMP ADJ
Meeting Room
A/C
MODE SPEED TEMP
COOL
LOW
MODE TEMP ADJ
?
N O T E
The max/min temperature is available to change by setting the cooling
lower limit for setting temperature (or heating upper limit for setting
temperature) from the function selection.
?
N O T E
• During the dry operation, the fan speed is automatically changed to
"LOW" and cannot be changed to other fan speed. ("LOW" will NOT
be displayed on LCD (liquid crystal display) at this time. The present
setting condition will be displayed on LCD).
• The fan speed settings "HIGH H" and (or) "AUTO" may not be
available depending on the indoor unit type.