Hitachi PC-ARFP1E Manual De Instalación Y Funcionamiento página 32

MENU OPERATION
14.2 FILTER SIGN RESET
This function is used to turn off the filter sign indication.
?
N O T E
If the function with the indication of "
"Setting Disabled" will be displayed because the setting accumulated
time by function b4 is insufficient.
1 Select "Filter Sign Reset" from the menu and press "OK".
The confirmation screen will be displayed.
OK
OK
14.3 ELEVATING GRILLE
This function is available only when the elevating grille is
equipped with the air panel.
!
C A U T I O N
Caution of Setting Elevating Grille into Air Panel After Cleaning.
When the air inlet grille is set inside the air panel, ensure that
the air inlet grille is horizontal and the wire is suspended tightly
without loosening. After the above is ensured, set the air inlet
grille.
If the air inlet grille is inclined and the wire is loosened, they may
be caught in the pulley. It may lead to a failure of the pulley or
pulley block. If the worst happens, it may cause personal injury
due to falling the air panel.
Wire
Slowly push the air inlet grille in
the arrow direction
Air inlet grille
This function is for the air inlet grille automatically moves
upward or downward from the air panel when cleaning the air
filter and air inlet grille.
24 PMML0404A rev.1.1 - 06/2022
" is selected from the menu,
Menu 15:10(Fri)
Filter Sign Reset
Elevating Grille
01
Function 3
/
Simple Timer 03
Schedule Timer
SEL. OK ENT. RTN.
Horizontal
Wire is loosened
2 Select "Yes" by pressing " " or " " and press "OK". The
indication of "FLTR" will be turned OFF and the screen will
return to the normal mode.
OK
OK
?
N O T E
• This function is available only when the elevating grille is equipped
with the indoor unit.
• Make sure that the unit operation is stopped before using the
elevating grille.
• The elevating grille function is not available when the unit is operated.
1 Press " " (menu) and select "Elevating Grille" from the
menu. Press "OK".
OK
OK
?
N O T E
If the number of indoor unit connected with the remote control switch is 1
(one), (3) will be displayed after the procedure (1).
2 Select the indoor unit by pressing " ", " ", " " or " ". Press
"OK".
Elevating Grille
00-00
01-01
02-02
SEL.
FLTR
Filter Sign Reset
Reset filter sign?
Yes No
SEL. OK ENT. RTN.
Menu 15:10(Fri)
Filter Sign Reset
Elevating Grille
01
Function 3
/
Simple Timer 03
Schedule Timer
SEL. ENT. RTN.
OK
UPDW
All
ENT. RTN.
OK