Emos P5729T Manual De Instrucciones página 3

GB | Replacement Button
Designed for wireless doorbell P5729.
Specifications
Transmission range: up to 180 m in an open area (can drop down
to one fifth in a busy area)
Transmission frequency: 433.92 MHz, 5 mW e.r.p. max.
Button: water resistant; enclosure rating IP44
Pairing of chime with buttons: self-learning function
Button power supply: battery-free
Includes: double-sided adhesive tape
Button Description
(see Fig. 1)
1 – button LED
2 – ring button
3 – holes for opening the battery cover (rear)
4 – openings for mounting onto a wall
Chime Description
(see Fig. 2)
1 – bell LED
2 – speaker
3 – pairing/volume setting button
4 – ringtone change button
Pairing the Button with the Chime
1. Plug the chime unit into a 230 V AC/50 Hz socket.
2. Then, long-press the pairing button
ca. 5 seconds.
3. The chime LED will light up; release the
The chime will switch to self-learning pairing mode which lasts
for 25 seconds.
During this time, press the ring button. The chime will ring and
the button is now paired with the chime.
This automatically ends self-learning mode.
4. To pair multiple buttons, repeat the process for each button
from step 1.
3
on the chime for
button.