Milwaukee CLL Manual Original página 5

CHANGE BATTERIES
Change the batteries when the laser beams begin to dim.
If the cross laser is not in use for a long period of time, remove the batteries from the battery
compartment. This will prevent batteries from leaking and corrosion damage.
1
2
3
click
ENGLISH
LOW BATTERY INDICATION
To indicate low battery, the laser lines will flash.
– self levelling mode
– manual mode : 3 times every 8 seconds
The low battery indicator flashing will continue until the batteries are removed and replaced.
During self-leveling, the out-of-level indicator (flash-ing 3 times per second) will override the low battery
indictor.
Low batterry indication appears about 30 minutes of battery life remaining. Battery life may vary by brand/
age. Replace the batteries as soon as possible.
MAGNETIC WALL MOUNT
Use the magnetic wall mount to fix the laser to a wall or metallic structures or similar.
4 x 1.5 V
AA LR6
: 3 times every 4 seconds
4