Milwaukee CLL Manual Original página 6

TRACK CLIP
Use the track clip additionally to fix the laser magnetically to the ceiling kit. Use the ceiling kit to clamp the
laser to ceiling channels, racks...
TRIPOD MOUNT
Use the tripod mount to fix the laser on a tripod
ENGLISH
2
3
1
Tripod mount 1/4"
DETECTOR / POWER SAVE MODE
A detector is not included and must be purchased separately.
For information on how to operate the detector, please refer to the operating instructions for the detector.
Use Detector / power save mode for use with MILWAUKEE laser line detector and to extend the battery
run time. Manually activate Detector / power save mode by holding the Mode button for 3 seconds. Visual
range will be decreased when Detector / Power save mode is activated. Power save mode is indicated
when flashing laser output appears with approximately 30 minutes battery left.
The detector only response at power save mode.
5