Milwaukee CLL Manual Original página 7

WORKING IN SELF-LEVELING MODE
In self-leveling mode the cross laser will level itself in a ±4° range and can project a horizontal beam, a
vertical beam or both beams simultaneously.
1
Place the cross laser on a solid flat
vibration free surface or on a tripod.
2
Slide locking switch to position.
3
The cross laser will generate 2 laser
beams.
- vertical beam forward
- horizontal beam forward
The cross laser will generate
forward cross beam when all beams
are activated.
ENGLISH
1/4" male thread
4
Choose the beams that you
want to work with by pushing
the MODE button
5
> 4°
If the initial level of the cross
laser is beyond ± 3° and the
self-leveling mode is
> 4°
activated, the laser beams will
flash
In this case reposition the
cross laser.
6
Before moving the cross laser, slide the locking
position. This will lock the
switch the OFF
pendulum and protect
your cross laser.
6