Publicidad
Idiomas disponibles
Idiomas disponibles
When you connect an optional CD unit, you
can label CD and CD TEXT discs with a
personalized name using the disc memo
function. Refer to "Labeling a CD" (page 15).
However, if you use personalized labels, they
will always take priority over the original CD
TEXT information when such information is
displayed.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
Tip
The M ot ion Display mode can be t urned of f . (See
" Changing t he sound and display set t ings" on
page 29).
Aut om at ically scrolling a disc nam e
— Auto Scroll
If the disc name, artist name, or track name on
an MD or a CD TEXT disc exceeds 10
characters and the Auto Scroll function is on,
information automatically scrolls across the
display as follows:
• The disc name appears w hen t he disc has
changed (if t he disc name is select ed as t he
display it em).
• The t rack name appears w hen t he t rack has
changed (if t he t rack name is select ed as t he
display it em).
• The disc or t rack name appears depending on
t he set t ing w hen you press (SOURCE) t o select
an M D or CD TEXT disc.
If you press (DSPL) to change the display
item, the disc or track name of the MD or CD
TEXT disc is scrolled automatically whether
you set the function on or off.
1
During playback, press (MENU) .
2
Press either side of (DISC/PRST)
repeatedly until "A.Scrl" appears.
3
Press (+) side of (SEEK/AMS) to select
"A.Scrl on."
4
Press (ENTER) .
To cancel Auto Scroll, select "A.Scrl off" in
step 3 above.
Downloaded from:
https://www.usersmanualguide.com/
Note
For some CD TEXT discs w it h very many charact ers,
t he f ollow ing cases may happen:
— Some of t he charact ers are not displayed.
— Aut o Scroll does not w ork.
Locat ing a specif ic t rack
— Automatic M usic Sensor (AM S)
During playback, press either side of
(SEEK/AMS) momentarily for each track
you w ant to skip.
To locate
preceding
tracks
Locat ing a specif ic point in a t rack
— M anual Search
During playback, press and hold either
side of (SEEK/AMS) . Release w hen you
have found the desired point.
To search
backw ard
Note
If "
" or "
display, you have reached t he beginning or t he
end of t he disc and you cannot go any f urt her.
Locat ing a disc
— Disc Selection
When an optional CD/ M D unit is
connected, press either side of
(DISC/PRST) to select the desired disc.
The desired disc in the current optional
CD/MD unit begins playback.
To locate
succeeding
tracks
To search
forw ard
" appears in t he
13
Publicidad
