Publicidad
Idiomas disponibles
Idiomas disponibles
EN
not come into contact with the cutting
accessories when using the machine.
Before starting:
. Carry out an inspection to ensure
that the unit is properly assembled and
that safety issues and performance are
being addressed;
. Check if the spark plug cap
(connector) is connected to the spark
plug;
. Check if the safety devices are in good
conditions and working properly. Never
use the equipment if the safety devices
are missing, damaged or worn;
. Check that the transportation strap
and fastening accessories are in good
condition and properly assembled;
. Replace damaged parts, as all other
worn ones.
. After mounting the accessories and
before using the device, you must run
a test in maximum speed at no load for
a certain time. Check for misalignments
in the moving parts or any other
condition that may affect the operation
of the unit. Check that all moving parts
rotate smoothly and without unusual
noises;
. Perform all the necessary adjustments
to the correct assembly of the machine
and if you have any questions or
problems, contact your official dealer;
. Please check the local regulations
about the permitted hours to use
gardening machines with combustion
engine.
2.5 - WHILE OPERATING
Keep other people away from
the
working
operate the device if there are animals
or people, especially children, in the
risk zone. During operation, particles
can be thrown into high speed and
cause injury.
Keep the safety distance from objects
(vehicles
property damage.
Keep the safety distance when two or
more people work simultaneously in the
same area.
Work only in daylight or with good
artificial lighting. Do not use the unit at
night or when it is not possible to have
a clear view of the work area.
Never work with the unit when adverse
metrological conditions such as dense
fog, rain or strong wind, storms or
lightning occur.
During the operation, walk forwards
step by step and observe the area of
the disc or the cutting head with nylon
line. Avoid walking backwards to avoid
the risk of tripping.
While using the unit, move to a stable
position and keep balanced. Do not use
the tool in slippery, irregular or unstable
surfaces, or in a lumpy ground.
Keep yourself and clothing away
from the cutting device.
Always use personal protective clothing
and equipment. The use of face shields
and goggles, dust masks, hearing
protection,
long-sleeved shirts, gloves, helmets
and knees guards, on the appropriate
conditions, reduces the risk of injury.
The clothing worn while using this
machine must be appropriate, tight and
closed. Do not wear loose clothing or
jewellery. Keep hair, clothing, fingers
and the rest of the body away from
moving parts.
When operating the machine, always
use security shoes and a non-slip
area.
Never
sole that covers the foot. Never work
barefoot or with sandals.
In case of nausea, headaches, sight
problems (eg. reduced vision), hearing
problems,
ability to concentrate, stop using the
and
glasses)
to
avoid
anti-slip
safety
shoes,
dizziness
and
reduced
machine immediately. These symptoms
may be caused by high exhaust gas
concentration.
The combustion engine produces
poisonous gases as soon as it starts
working. These gases contain toxic
carbon
monoxide,
a
odourless gas, as well as other harmful
substances. The combustion engine
may never be turned on inside confined
or poorly ventilated spaces.
While operating the machine, schedule
some time to rest and avoid using
the machine for long periods of time.
Permanent vibration is very harmful.
Do not remove the wrapped product
from the cutting accessories and
respective protections while the motor
is running or the cutting disc is rotating.
Stop the engine and wait for all the
accessories to stop before removing
the material wrapped around the disc
shaft or cutting head with nylon line and
its protections.
A massive load of vibrations may
damage nervous and circulatory
systems, especially to whom have
circulatory problems. Inform your
doctor if any symptoms arise caused by
vibration. Among these symptoms, that
occur specially on fingers, hand and
wrists, are also included loss of
sensation, pain, muscle weakness, skin
discoloration or tingling sensation.
The control and safety devices installed
in the machine cannot be removed or
inhibited.
2.6 - MAINTENANCE AND
CLEANING
When carrying out any cleaning,
adjusting, repairing or maintaining
work, wear gloves and place the
machine in a firm and steady surface.
Remove the spark plug cap as
an unintentional spark can
cause burns or an electric shock. A
contact of the spark plug with the pipe
may cause an involuntary start of the
colourless,
41
Publicidad
