Publicidad
Idiomas disponibles
Idiomas disponibles
EN
8. MAINTENANCE PLAN
The
maintenance
plan
routines, inspection procedures and
simple processes of maintenance,
using basic tools on the compressor.
Other more complex maintenance
tasks or that requires specific tools
must be carried out by a qualified
technician or the technical assistance.
Intervention
Check if all nuts and screws are
properly tightened
Check the accessories and cutting
protection
Check fuel system impermeability
Lubricate the gearbox and rotation shaft
Check the air filter
Clean the air filter
Clean the fuel filter
Replace the fuel filter
Clean the spark plug and readjust the
space between electrodes
Replace the spark plug
Clean the carburetor pump
Clean the fuel tank
The maintenance plan included in
this manual is based on normal work
conditions. If the compressor is used in
includes
severe conditions, such as overcharge,
overheat, damp or dusty abnormal
conditions, ask your distributor for
recommendations.
Not following the instructions
about maintenance and safety
may lead to injuries or even death.
1st month
or after 20
✓
✓
✓
✓
✓
Each 3 months
or after 50
hours
hours
✓(1)
✓
✓
Always follow the instructions given.
Every 6
Every year
months or
or after 300
after 100
hours
✓
✓
✓
hours
✓
47
Publicidad
