Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the Doorbell Button (Transmitter)
1. Begin by pairing the button with the chime.
2. Before installation, check that the pair works reliably in the
chosen spot.
3. Remove the mounting pad from the battery cover, see the fig. 3.
4. Use the double-sided adhesive tape (included) or two screws
(not included) to fix the back of the mounting pad to the wall.
Although the button is weather resistant, choose a location
where it is protected, e.g. in a wall recess.
5. Fit the mounting pad back onto the button.
6. Press the button to ring the chime. Pressing is accompanied by
LED illumination indicating the button has sent a radio signal.
The chime plays the selected ringtone.
Note: The doorbell button (transmitter) can be placed on wood or
brick walls without issue. However, never place the button directly
onto metal objects or materials containing metal, such as plastic
windows or doors that have a metal frame. In such cases, the
transmitter will not work properly.
Troubleshooting
The chime does not ring:
• The chime may be out of range.
• Change the distance between the button and the chime; the
range may be affected by local conditions.
• The button battery may be drained.
• Replace the battery. Make sure it has the correct polarity.
• Pair the button with the chime again.
The chime is not powered:
• Make sure the chime is properly plugged into the socket and
that power is on or the fuse/circuit breaker for the branch is on.
Upkeep and Maintenance
The wireless digital doorchime is a sensitive electronic device.
Therefore, it is necessary to observe the following precautions:
• The chime (receiver) is designed for indoor use in dry envi-
ronments only.
5
Publicidad
