Vermeiren 708D Manual De Instrucciones página 17

4.4 Length of the footrests
CAUTION
Risk of damage – Avoid that the footplates make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
1. Remove the Allen screw  on the lower end of the upper
part of the footrests.
2. Adjust the length of the footrest to a comfortable length
by moving the hexagonal inner tube out or in.
3. Tighten the Allen screw  properly.
The minimum length is when the footrest tube changes
from hexagonal in round. The maximum length is until
the mark in the tube (a straight line).
15
708D
2023-01
Installation and adjustment
EN
NL