Krups Virtuoso XP442 Manual De Instrucciones página 11

„ Steam nozzle : To prevent milk from drying inside the nozzle, please clean it after each
use. To do this, follow the steps for foaming the milk, replacing 100 ml of milk with 60
ml of water. After turning off the steam, quickly and carefully clean the steam nozzle
using a damp sponge (in order to remove any residue). Pull the tube of the steam nozzle
downwards. Carefully clean the steam nozzle with lukewarm water (28) (29). Fit the tube
back onto the steam nozzle.
IMPORTANT! Warning! Do not clean any parts of this appliance in a
dishwasher.
The machine can be descaled at any time, even if the descaling light is not on. However,
the coffee machine auto counts the use cycles and gives the alert when the machine must
be descaled : when the 1 cup espresso button
and 2 cups espresso button white light keep on, the machine needs to be descaled.
1. Prepare the descaler in accordance with the manufacturer's instructions, add to the water
tank and fill with approx. 750 ml drinking water (2). Place the tank in the machine (3).
2. Place a receptacle with a capacity of at least 1 liter underneath the spouts.
3. Insert the filter holder without filter.
4. Press 1 cup and 2 cup espresso buttons
auto descaling program.
machine will go to descaling status automatically. Water pump works 10 seconds, stops
120 seconds, keeps it in cycles until water tank will be empty.
5. Once descaling finishes, 2 espresso buttons
6. Pour drinking water in the tank and rinse the whole water flowing system (without using
coffee, repeat making coffee steps, making hot water and steaming).
6
DESCALING
white light and white light flash in turn. Release the buttons,
white light and orange light flash in turn
at the same time for 3 seconds to go to
white light keep on.