Krups Virtuoso XP442 Manual De Instrucciones página 8

IMPORTANT!
If the espresso function is used for the first time, the appliance must be
cleaned as described in the "FIRST USE" paragraph.
IMPORTANT! To prevent splashes of hot water, check that the filter holder
has been tightened until it stops before preparing the coffee. Do not
remove the filter holder while the water is flowing, as the appliance is still
under pressure.
With ground coffee
The type of coffee you choose will determine the strength and taste of your espresso: the
finer your ground coffee, the more intense your espresso will be.
1. Fill the water tank with drinking water (2) and refit it on the appliance, making sure that
it is correctly in place (3).
2. Connect the device to a mains socket (4).
Turn on the machine by pressing On button (C) (5), On button light switches on, and
3.
espresso buttons
temperature reaches pre-set value, espresso buttons white light will keep on.
4. Add the ground coffee to the 1 cup or 2 cups filter (F1, F2) using the measuring spoon
(K, 1 spoon = 1 measure = 1 espresso) (15, 16), then pack it using the tamper (17),
turning it using a circular motion. Once packed, the coffee measure should not exceed
the MAX level. For best quality, pack the coffee effectively. Clean off any excess coffee
from around the filter holder (18).
5. Slot the filter holder into place then turn it to the right until it stops (19).
6. Place a cup or two cups under the filter holder.
7. Press 1 espresso button
cups you want to taste (15). Selected button white light will flash, the machine starts
to make coffee (21). When coffee is done, espresso buttons white light keep on. Your
coffee is ready.
8. Unlock the filter holder by turning it to the left (22) and remove it from the appliance.
Do not touch the filter as it will be hot. Empty the filter. Remove the filter from the filter
holder.
9. Wash the filter and filter holder under running water to remove the rest of the coffee
(23).
With coffee pods
The device is compatible with all common coffee pods (F3). Note: For larger coffee pods,
we recommend using the 1 cup filter. For espresso pods, use the pod filter.
1. Insert the filter for coffee pods into the filter holder.
2. Place the pod as centrally as possible in the filter holder. Follow the instructions on the
packaging of the coffee pods for correct placement of the pod in the filter holder.
3. In order to start the brewing process, prepare the device by carrying out steps 1–3
under "With ground coffee" and press the
MAKING ESPRESSO
lights flash white (6). The machine is pre-heating. When the
or 2 espresso button (20), according to the number of
or button.
3