To operate the product
To cut the lawn edge
WARNING:
material, or let other persons remove cut
material, while the product is on or the
cutting equipment rotates, as this can result
in serious injury.
WARNING:
objects. Always wear approved eye
protection. Never lean over the cutting
attachment guard. Stones, rubbish, etc., can
be thrown up into the eyes which can cause
blindness or serious injury.
WARNING:
or animals come closer than 15 meters
while you work. When several operators are
working in the same area the safety distance
should be at least 15 meters. Otherwise
there is a risk of serious personal injury.
Stop the product immediately if anyone
approaches. Never swing the product
around without first checking behind you to
make sure that no one is within the safety
zone.
Make sure that you have a safe and stable work
position.
•
Always hold the product with two hands. Hold the
product on the right side of your body.
•
Use your right hand to control the power trigger.
•
Always keep the blade near the ground.
•
Make sure that your hand and feet do not come near
the cutting attachment when the engine operates.
•
When the engine is stopped, keep your hands and
feet away from the cutting attachment until it has
fully stopped.
•
Always edge at full power trigger.
•
Walk slowly.
•
Make sure that the cut material ejects into an area
that was cut before.
•
Be especially careful when you pull the edger
rearward during work.
1847 - 001 - 28.11.2022
Do not remove the cut
Watch out for thrown
Ensure that no people
•
If any foreign object is hit or if vibrations occur
stop the product immediately. Remove the battery
from the product and check that the product is not
damaged.
•
Always wear heavy duty gloves when you attach,
examine or clean the cutting equipment.
To stop the product
1. Release the power trigger or the power trigger
lockout.
2. Put the product in the stop position.
3. Push the stop button.
4. Push the release buttons on the battery and pull the
battery out.
15