Publicidad
Idiomas disponibles
Idiomas disponibles
1. Front guard
2. Bevel gear
3. Cutting attachment guard
4. Grease filler cap, bevel gear
5. Shaft
6. Loop handle
7. Drive disc
8. Blade
9. Support flange
10. Washers
11. Locking screw
12. Locknut
13. Charger
14. Charger cable
15. Power on and Warning indicator (LED)
16. Power trigger lockout
17. Power trigger
18. User interface
19. Start/stop button
20. Speed mode button
21. Knob
22. Battery
23. Battery release buttons
24. Battery indicator button
25. Battery status
26. Warning indicator
27. 4 mm hex key
28. Locking pin
29. Combination tool
30. Harness
31. Harness support hook
32. Operator's manual
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Use approved hearing protection. Use
approved eye protection.
Use approved protective gloves.
1847 - 001 - 28.11.2022
Use heavy-duty slip-resistant boots.
Maximum speed of the output shaft.
/min
Protected against splashing water.
Watch out for thrown objets and
richochets.
Warning for rotating blade. Keep hands
and feet clear.
Warning! The blade continues to rotate
even after the engine has stopped. When
the engine has stopped, stop the blade
from rotating by letting the blade come in
contact with the ground.
Disconnect battery before maintenance.
Direct current.
If the product features
technology. The
marked on the product name label.
yyyywwxxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Keep a minimum distance of
15 m to persons and animals
during operation of the prod-
uct.
®
Bluetooth
wireless
®
Bluetooth
symbol will be
The rating plate or the la-
ser printing shows the se-
rial number. yyyy is the
production year and ww is
the production week.
3
Publicidad
