Publicidad
Idiomas disponibles
Idiomas disponibles
A (mm)
760
Before installing the hob, make sure that
• The work surface is upright and leveled, and no structural parts can
interfere with the space requirements;
• The work surface is made of a heat-resistant material;
• If the hob is installed above an oven, the oven has a built-in cooling fan;
• The installation complies with all applicable requirements, rules and
regulations;
• There is a suitable isolating switch providing full disconnection from the
mains power supply incorporated in the permanent wiring, mounted and
positioned to comply with local safety rules and regulations;
• The isolating switch must be of an approved type and provide a 3-mm
contact gap in all poles (or in all live conductors, if local regulations allow
this variation);
Induction Hobb 4 Zones | Placa de Inducción con 4 Zonas | Placa de Indução com 4 Zonas
AF Manual Instruções_Placas_BIH3300_A5_1817.indd 13
B (mm)
C (mm)
50 min.
20 min.
D
Air intake
Air exit 5mm
EN
E
13
03/08/2017 16:41
Publicidad
