Descargar Imprimir esta página

Becken BIH3300 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not use adapters, reducers, or extension leads to connect the
hob to the mains power supply, as they can cause overheating and,
therefore, a fire. The power supply cable must not touch any hot parts
and must be positioned so that its temperature does not exceed 75 ˚C
at any point.
Check with an electrician whether the domestic wiring system
is suitable and there is no need for refurbishments. Any
alterations must be made by a qualified electrician only.
The power supply should be connected in compliance with the
relevant standards, or with a single-pole circuit breaker, in accordance
with the connection method illustrated below.
• If the cable is damaged or in need of replacement, the operation
must be carried out by a qualified technician with dedicated tools to
avoid any accidents.
• If the appliance is being connected directly to the mains with an
all-pole circuit breaker, it must be installed with a minimum 3-mm
opening between contacts.
• The technician must ensure that the correct electrical connection
has been made and that it is compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised
technicians only.
16
AF Manual Instruções_Placas_BIH3300_A5_1817.indd 16
03/08/2017 16:41

Publicidad

loading