Becken BIH3300 Manual De Instrucciones página 14

• The isolating switch must be easily accessible to the user after the
hob is installed;
• Local building authorities and by-laws should be referred to, if there
are doubts regarding the installation;
• Heat-resistant and easy-to-clean finishes (such as ceramic tiles) are
used on the wall surfaces surrounding the hob.
After the hob is installed, make sure that
• The power supply cable is not accessible through cupboard doors or
drawers;
• There is an adequate flow of fresh air from outside the cabinetry to
the base of the hob;
• If the hob is installed above a drawer or cupboard, a thermal
protection barrier is installed below the base of the hob;
• The isolating switch is easily accessible by the user.
Before fixing the brackets
The unit should be placed on a stable, smooth surface (use the packaging).
Do not apply force onto the controls protruding from the hob.
Adjusting the position of the brackets
Fix the hob on the work surface by screwing the 4 brackets on the
bottom of the hob (see picture) after the installation.
14
AF Manual Instruções_Placas_BIH3300_A5_1817.indd 14
A. Screw B. Bracket C. Screw hole D. Base
03/08/2017 16:41