Publicidad
Idiomas disponibles
Idiomas disponibles
Always lift the pans from the Induction hob – do not slide them, or they
may scratch the glass.
Using your Induction Hob
To start cooking
1. Press the ON/OFF control.
After the power is on, the buzzer beeps once,
and all displays show the symbols " – " or " – – ",
indicating that the induction hob has entered
the standby mode.
2. Place a suitable pan on the cooking zone that you
wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. An indicator light will flash next to the key when
pressing the cooking zone selection control.
4. Select a heat setting by pressing the "-" or "+"
controls.
• If you don't select a heat setting within 1 minute,
the Induction hob will switch off automatically.
You will need to start over from step 1.
• You can modify the heat setting at any time during
cooking.
20
AF Manual Instruções_Placas_BIH3300_A5_1817.indd 20
03/08/2017 16:41
Publicidad
