Publicidad
Idiomas disponibles
Idiomas disponibles
Advance
VI. REMOVAL AND REPLACEMENT
REPLACING THE INTERIORLIGHTBULB
•
Turn off the power at the main isolator or remove the cabinet plug from the socket.
•
Open the door.
•
Remove the screw securing the canopy and then lift thecanopy.
•
Ensure that the new bulb has the same rating as the old bulb. Voltage and wattage are
printed on the bulb.
•
Remove and replace the lightbulb.
DISPOSING OF THECABINET
•
The cooling gas present in the cabinet can be identified from the nameplate.
•
The cabinet is produced from recyclable materials in accordance with EU regulations.
Therefore, at the end of its economic life, the cabinet must be passed to the appropriate
recycling centre for disposal.
•
Do not recycle the cabinet as metal or household waste.
•
Do not compact the cooling plant refrigeration circuit.
Adhere to local by-laws and regulations during disposal of the cabinet.
IMPORTANT
EN
19
Publicidad
