Publicidad
Idiomas disponibles
Idiomas disponibles
Advance
DISPLAY TEXTS AND THEIRMEANING
8.0
Critical values 8.0 °C/°F
Dur
The display shows the alarm time
h01
1-hour alarm (cont.)
n15
1 hour and 15-minute alarm
AH
Selected alarm
To exit the historical display, press and release the ON/STANDBY buttonrepeatedly.
To exit the process, repeatedly press the UP or DOWN buttons until the display shows thecabinet
temperature or wait 60 seconds without pressing anybuttons.
Alternative Exit method: press and release the ON/STANDBY button. If there are no alarms recorded,
the LS code will not be displayed.
ERROR CODES
Code
Description
Pr1
Cabinet probe error
Pr2
Evaporator probe error
The correction of these errors can only be undertaken by qualified technical personnel.
OPERATION STATUSES
Available operation statuses are listedbelow:
Status
Description
ON
The cabinet is powered up and operating
STANDBY
The cabinet is powered up but switchedoff
The cabinet has no power, the plug is not in thesocket,
OFF
or the main isolator is turned off
Do not carry out any maintenance or repair while the cabinet is in on or standby mode. Only when
the power supply is completely isolated from the cabinet can any works be done.
IMPORTANT
EN
9
Publicidad
