Using The Control Panel; Navigating In The Menu - melitta CI TOUCH Manual De Instrucciones

Basic operation
Switching on the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button.
» The welcome display appears on the
appliance.
» The appliance heats up and performs
automatic rinsing.
» The appliance is ready for operation.
Switching off the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button for 1-2 sec-
onds.
» If switch-off rinsing is activated, the
appliance performs automatic rinsing.
» The appliance switches off.
Information
ū The appliance switches off automati-
cally when it is not operated for a long
time. Automatic rinsing is also carried
out in this case.
ū The off time can be set in the Auto OFF
menu, see section 8.4, page 43.
ū If no beverage has been prepared since
switching on or if the water tank is
empty, no rinsing takes place.

4.2 Using the control panel

The essential functions can be accessed
using the control panel and the "rotary
switch".
Press the button with a fingertip. The con-
trol panel does not react when touched
with a pen or other objects.
Only those buttons that can be used in the
appliance's current status light up.

4.3 Navigating in the menu

To set individual beverages or for main-
tenance and care, the appliance must
display the ready symbol. You must then
call up the corresponding menu and
navigate in it.
36
On successful completion of all processes,
the ready symbol is shown on the display.
Observe the instructions on the display.
Direct keys
Espresso
Coffee strength
Strong
Confirm with OK:
Fig. 6: Example: display
Use the following options to navigate in
the menu:
Calling up the menu and confirming the
selection
Press the "rotary switch" for longer than 2
seconds to call up the menu.
Press the "rotary switch" briefly to confirm
your selection.
Navigating in the menu
Turn the "rotary switch" to navigate down
or up in the menu.
Exiting a menu
Select the Exit command with the "rotary
switch" and confirm your selection to exit
a menu.
Exit submenus that only display informa-
tion and where no settings are made by
pressing briefly.
Calling up submenus
Some of the appliance's functions are
reached by calling up several submenus in
succession.
Submenus are always called up in a similar
way. Navigation to the Descaling pro-
gramme is described here as an example.