Setting The Grinding Fineness; Care And Maintenance; General Cleaning; Rinsing The Coffee System - melitta CI TOUCH Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

System
The System menu provides information
on the software version and access to
the venting function, see section 10.1,
page 50.
8.8 Setting the grinding
fineness
The grinding fineness of the coffee beans
influences the flavour of the coffee. The
grinding fineness has been optimally set
prior to delivery.
Fig. 12: Grinding fineness setting
Use the lever on the rear side to set the
grinding fineness.
1. Move the lever:
ū To the right = grinding fineness
coarser
ū To the left = grinding fineness finer
Information
ū If the grinding fineness is set finer, the
coffee flavour is stronger.
ū The grinding fineness is optimally set
when the coffee flows evenly out of the
outlet and a fine, dense crema appears.
9

Care and maintenance

Regular cleaning and maintenance ensure
the consistent high quality of your bever-
ages.
Care and maintenance

9.1 General cleaning

Clean the appliance regularly. Immediately
remove external soiling caused by milk
and coffee.
ATTENTION
The use of unsuitable cleaning agents
can lead to scratched surfaces.
Do not use any abrasive cloths, sponges
ƒ
or cleaning agents.
Requirement: The appliance is switched
off.
Clean the outside of the appliance with
ƒ
a soft, damp cloth and normal wash-
ing-up liquid.
Rinse the drip tray and the coffee
ƒ
grounds container with a soft, damp
cloth and normal washing-up liquid.
Clean the bean container with a soft,
ƒ
dry cloth.

9.2 Rinsing the coffee system

During rinsing, the nozzles at the outlet
and the internal parts of the coffee system
are rinsed. As a result, rinsing water from
the interior enters the drip tray.
If switch-off rinsing is not deactivated, the
appliance rinses the coffee system when
switching on and off.
Rinsing can also be carried out manually.
Requirement: The appliance is ready for
operation.
1. Place a vessel beneath the outlet.
2. Press the "rotary switch" for 2 seconds.
»
The menu appears on the display.
3. Navigate to the Care > Rinsing menu.
4. Select Start and confirm your selection.
»
The coffee system is rinsed.
45

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ci touch f630-102

Tabla de contenido