Personal Settings - "My Coffee; Editing Personal User Profiles; Selecting/Changing Personal Settings; Preparing Beverages With Personal Settings - melitta CI TOUCH Manual De Instrucciones

Personal settings – "My Coffee"
7 Personal settings
– "My Coffee"
The "My Coffee" function lets you to save
personal beverage settings and assign
them to a user.
7.1 Editing personal user
profiles
Up to four user profiles can be used.
Changing the name of a user profile
The names of the user profiles can be
changed.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the My
3. Select a user and confirm your selec-
tion.
4. Select Change name and confirm your
selection.
» The menu for selecting individual
characters appears.
5. Select individual characters by turning
the "rotary switch" and confirm each of
them.
6. Repeatedly select the Exit command to
exit the menu.
Activating/deactivating a user profile
Only users whose profile is activated can
be used.
Requirement: The appliance is ready for
operation.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the My
3. Select a user and confirm your selec-
tion.
4. Select Enabled/disabled and confirm
your selection.
5. Select Enabled or Disabled and confirm
your selection again.
6. Select the Exit command to exit the
menu.
42
Coffee menu.
Coffee menu.
7.2 Selecting/changing per-
sonal settings
Depending on the beverage, the following
settings can be assigned to a user:
Recipes, coffee amount, amount of froth,
milk amount, hot water amount, coffee
strength and temperature.
The assignment of personal settings to a
user is always similar. Setting the coffee
amount for a Cappuccino is described here
as an example.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the My
3. Select a user and confirm your selec-
tion.
4. Navigate to the Cappuccino > Coffee
amount menu.
5. Select an amount and confirm your
selection.
6. Select the Exit command to exit the
menu.
» The next time a cappuccino is prepared
by the user, the selected amount of
coffee is used.
7.3 Preparing beverages with
personal settings
The preparation of beverages using
the "My Coffee" function is similar
for all beverages. The preparation of a cap-
puccino is described here as an example.
1. Place a vessel beneath the outlet.
2. Press the "my recipes" button until the
desired user is shown on the display.
3. Press the "Cappuccino" button.
» Beverage dispensing is carried out
and ends automatically.
4. Remove the vessel.
» Easy Cleaning? appears on the dis-
play. (Press rotary switch to start).
5. Run the Easy Cleaning programme or
prepare further beverages and run the
Easy Cleaning programme later, see
section 9.4.
Coffee menu.