BRAND Transferpette S Instrucciones De Manejo página 45

4. Dispensing a sample
b.
c.
5. Ejecting a tip
The instrument should always be stored in the provided shelf mount or
table stand and kept in an upright position, without any tip inserted.
a.
Transferpette® S 997207
a.
a.
Place the pipette tip against the ves-
sel wall. Hold the pipette at an angle
of 30-45° to the vessel wall.
b.
Press the pipetting button at a uni-
form speed until the first resistance is
felt and hold it. To improve accuracy,
comply with the corresponding wait
time for serums, highly-viscous or
low-density media.
c.
Completely empty the tip by over-
stroking: press the pipetting button
until the second resistance is felt.
d.
While doing this, wipe the pipette tip
against the vessel wall.
e.
Remove the pipette tip from the ves-
sel wall and allow the pipetting but-
ton to move back to its original posi-
tion.
NOTICE
a.
Hold the pipette shaft over a suitable
disposal bin and press the tip ejec-
tion button all the way down.
Operating manual
45