Descargar Imprimir esta página

Skil BW9501-00 Manual Del Propietário página 22

Publicidad

Idiomas disponibles

Idiomas disponibles

Table Tilt Adjustment (Fig. 20)
a. Loosen the two table locking knobs slightly.
b. Turn the angle adjustment knob to tilt the
saw table until it reaches the desired angle.
c. Using the scale indicator, check angle
markings.
d. Retighten the table locking knobs to hold
saw table securely in place.
Miter Guide Adjustment (Fig. 21)
The miter guide can be turned 60° to the right
or left.
a. Loosen the locking knob on the miter guide.
b. With the miter guide in the miter guide slot,
rotate the guide to align the scale indicator
with the desired angle.
c. Retighten the locking knob.
Dust Exhaust Port (Fig. 22)
A 2-1/2" (63.5 mm) dust exhaust port is located
on the motor side of the band saw. This port
can be connected to a shop vac or dust bag.
WARNING
shop vac when
cutting metal. Hot metal
shavings may ignite saw dust.
22
To reduce the risk of fire
do not use dust bag or
Fig. 20
Saw Table
Table Locking
Knobs
Angle
Adjustment
Knob
Fig. 21
Locking
Knob
Scale
Indicator
Fig. 22
Dust Exhaust Port
Scale
Indicato
r
Miter Guide
Slot
Miter Guide

Publicidad

loading