Publicidad
Step 8
Carefully turn your unit over onto its front edges. Lay the SMALL
å
BACK (G) over the small opening of your unit.
Make equal margins along all four edges of the SMALL BACK (G). Push
å
on opposite corners of your unit if needed to make it "square".
Fasten the SMALL BACK (G) to your unit using twenty-four NAILS (1N).
å
Unfold the LARGE BACK (F) and lay it over the large opening. Make
å
equal margins along three edges of the LARGE BACK. Push on opposite
corners of your unit if needed to make it "square".
NOTE: The LARGE BACK will overlap the SMALL BACK.
å
Fasten the LARGE BACK (F) to your unit using the remaining NAILS (1N).
å
NOTE: A perforation has been provided for access through the BACK.
å
www.sauder.com/services
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Perforation
F
G
417146
Caution
NAIL
(58 used in this step)
1N
Page 13
Publicidad
