Publicidad
Step 12
1
D30
Groove
Insert the DRAWER SIDES (D30 and D31) at an angle
å
into the slot at each end of the DRAWER FRONT (K).
3
M67
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M67) to the
å
DRAWER FRONT (K). Tighten one HIDDEN CAM.
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D31
K
Maximum
Arrow
210 degrees
Minimum
190 degrees
K
VIEW THE T-LOCK BOX VIDEO
With the palm of your hand, tap the
2
DRAWER BOTTOM down into the groove.
U n
fi n
s u
i s h
r f a
e d
c e
D30
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D733) into the
å
grooves in the DRAWER SIDES (D30 and D31) and
DRAWER FRONT (K).
Start each screw a few turns before
4
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
M67
D30
Fasten the DRAWER BACK (D68) to the DRAWER
å
SIDES (D30 and D31) and DRAWER BRACE (M67). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S). Repeat
this step for the remaining drawers.
417146
D733
K
D31
30S
(20 used in this step)
D68
D31
Page 17
Publicidad
