Publicidad
Step 13
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D30 and D31).
å
Fasten a DRAWER RIGHT (35AC) to the DRAWER RIGHT SIDE (D30)
å
and a DRAWER LEFT (35AD) to the DRAWER LEFT SIDE (D31). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT"
å
for easy identifi cation and the glides are not intended to rotate.
NOTE: The screw head in the CAM must be visible through the
å
slotted hole in the SLIDE.
Repeat this step for the remaining drawers.
å
Glide end
1
2
Page 18
10A
D31
GOLD 5/16" FLAT HEAD SCREW
417146
If you're doing this to
help a friend, don't
leave without a bite.
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D30
2
(4 screws per drawer)
3S
(16 used in this step)
10A
Glide end
1
www.sauder.com/services
Publicidad
