Publicidad
Step 10
Carefully stand your unit upright.
å
Before fastening the DOOR to your unit, be sure the
å
mounting screw is against the stops as shown in the right
diagram. If it isn't, loosen the mounting screw to slide it
against the stops. Then tighten the mounting screw.
Fasten the DOOR (H) to the LEFT END (B) Use the screws
å
in the HINGE. See the next step for door adjustments.
You have the option of fastening a WOOD KNOB (60K) or
å
a CLEAR KNOB (107K) to the DOOR (H).
Fasten a CLEAR KNOB (107K) to the DOOR (H) with a
å
SILVER 3/4" MACHINE SCREW (20S) or fasten a WOOD
KNOB (60K) to the DOOR (H) with a BLACK 1-1/8" PAN
HEAD SCREW (9S).
9S
BLACK 1-1/8" PAN HEAD SCREW
(1 used in this step)
60K
107K
20S
SILVER 3/4" MACHINE SCREW
(1 used for the METAL KNOB)
www.sauder.com/services
B
H
417146
Stop
Mounting
screw
Hinge
Page 15
Publicidad
