Publicidad
0 0 0 0
0 0 0 0
A18
A19
D
D
G
G
Connect wiring from the motor to the wiring cover plate.
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched between
the motor and the housing.
A21
A20
H
Secure the motor by tightening the 2 screws.
Turn on the power source.
A22
A23
O N
O F F
I
Test the motor. If the motor does not run,
Insert one spring clip of the fan cover into the slot
check the plug connection.
on the motor housing.
7
41717-01 02/16/2008
41717-EngS_2-16-08_Arial.indd 7
2/16/08 3:51:27 PM
Publicidad
