Publicidad
DESCRIPTION OF THE APPLIANCE
A - Tank
C - Tank cover
D - Iron support grid
E - Appliance carrying handle
G - Steam button
INSTRUCTIONS FOR USE
Warning!
Place the appliance on a stable even surface (e.g. a table or an ironing board).
Warning!
Take care that the red arrow on the cartridge is facing in the direction of the corresponding arrow positioned above
Press lightly until the cartridge has reached the end of its housing.
anti-scale cartridge must be replaced when the resins contained therein have completely changed colour. The replacement
cartridges are available at the sale points or in Authorized Service Centers.
Filling the tank before use
Warning!
Warning!
To avoid damaging the pump, never operate the appliance without any water in the tank, even for dry ironing.
Switching on the appliance
Warning!
Do not release steam when the iron is standing on its grille rest (D).
operation sound (vibration). A decrease in the steam output may occur soon after the pump starts operating: it is perfectly
normal and after a few seconds the steam will again be regular.
If the iron has not been used for a long time, it is advisable to keep it in a horizontal position and send a few shots of steam
Shot of steam
from the steam holes in the plate of the iron. It is recommended that the button (G) is used for shorter periods.
12
I - Iron temperature control indicator light
J - Soleplate
K - Power cord
N - Cable compartment
). Wait for the indicator lamp (I) of the
-
) and press the steam
Publicidad
